Perfect Fit Roof And Side Blinds In Chesham

This conservatory is a double edwardian in Chesham, Buckinghamshire. We fitted it today with perfect fit roof blinds and perfect fit side blinds.

As usual with this type of blind we did no drilling or damge to the conservatory as the blinds all clip I using special brackets.

This was an interesting fit because our customer chose a different fabric for the roof and sides. The roof is Regency SPC Steel which is a medium metallic grey colour. The sides were made in Regency SPC Calico.

The roof blinds are operated with a control wand that clips onto the handle on each blind. The blinds can then be moved up and down as you wish.

The side blinds are operated by hand. They move up and down and stop where you leave them. There are no hanging cords to spoil the clean lines of your conservtory.

Double Edwardian Conservatory fitted with Perfect Fit Roof Blinds

This conservatory in Eversley, Hampshire has been fitted with perfect fit roof blinds. The fabric is from the new louvolite range called Regency SPC Calico. This 20mm pleated fabric has a special coating called Solar Protective Coating (SPC). This coating means that much of the glare and heat from the suns rays are reflected or absorbed away from your conservatory.

Keeping Cool In The Summer And Warm In The Winter

The main benefit is that you will find that your conservatory is cooler in the summer months and warmer in the winter months. In the hieght of summer it is best to leave the blinds across the roof so that there is no opportunity for heat gain in the early morning. The blinds cannot make it cool once the heat has got in but they will reduce the heat gain if they are shading your roof from the early morning.

It is unusual to have a double edwardian conservtory and as you can see from the photographs there are a lot of shaped blinds in the roof. As normal with perfect fit blinds they are all fitted with clip in brackets. No drilling is needed to install these roof blinds.

The roof blinds are operated with a twistlock wand that moves the blinds up and down. Even the shapes can be moved up and down. Because each glass section has its own blind the roof blinds appear to be a part of the roof rather than an add on unit.

No Sagging Or Badly Fitting Blinds

A further benefit of this type of blind is that the blinds cannot sag or get loose. Standard conservatory roof blinds can look very untidy after a few years because the tensions in the support wires can get loose. With perfect fit roof blinds this does not happen because even if the wire do lose some tension the blinds are still held tidily within the perfect fit frame. When we service the blinds we can check all the tensions but in the meantime the blinds still look great and operate well.

Perfect Fit Roof Blinds With Obtuse Shapes in Crowthorne

These Perfect Fit Roof Blinds were recently fitted to a conservatory in Crowthorne Berkshire. The perfect fit blind system means that we did no drilling to fit the blinds. The perfect fit roof blind system uses a clever system of clips. These clips are located between the glass gasket and the glass. The blinds are then simply attached to these clips.

This particular conservatory had the further complicaion of 4 obtuse angles in the roof. We overcame this problem by fitting filler blinds at the base of the perfect fit frame. We then made shaped pleated blinds to fill the rest of the shape. The main part of the blind moves up and down as normal. The bottom section is fixed.

We are the only company in the UK that make this type of perfect fit roof blind with obtuse angles. Even the inventors of the system do not offer this option.

The lower picture shows how we fit blinds where there is an opening roof light. We fit one blind above the control rod and the other below the control rod. The frames butt together – See Picture below.

The most complicated conservatory roof blinds in Fleet

 

Here are a number of photos of a conservatory we fitted with blinds in Elvetham Heath, Fleet. As you can see, the shapes we had to make were a bit of a challenge. All these blinds were fitted without drilling a single hole. They use the superb perfect fit roof blind system. In all there were 60 blinds including filler pieces. The blinds took 1 day to fit and look superb.

Our customers Mr and Mrs Neal were “Absolutely Thrilled” with the end result. All the blinds were made with Madrid SPC Crystal fabric in 20mm pleats. This fabric has the excellent SPC (Solar Protective Coating) backing that reduces glare and heat in conservatories.

We are finding that our customers much prefer their conservatory roof blinds made with the perfect fit system. The blinds simple clip in and can also be removed for cleaning and maintenance. We continue supplying the standard roof blinds with screw in brackets but the future is with perfect fit.

The other aspect of having blinds that simply clip in is that your 10 year window warranty will not be compromised in any way. We already have contacts with some of the local window companies who are now insisting on perfect fit blinds for their installations.

 

You can call us on 01344 452485 to arrange an estimate for these fabulous blinds.